Problems with input, Troubleshooting (advanced), Pressing a letter key produces a number – Panasonic CF-W8 User Manual
Page 120: Only capital letters are being input, Cannot input by touching the display
120
Troubleshooting (Advanced)
Pressing a letter key produces a number
z
The computer may be in ten-key mode.
If NumLk indicator
lights up, press NumLk, to disable the ten-key mode, and then input.
Only capital letters are being input
z
The computer may be in Caps Lock mode.
If Caps Lock indicator
lights up, press Caps Lock, to disable the Caps Lock mode, and then input.
How to input European characters (Я, а, з etc.), symbols or Euro currency sym-
bol is unclear
z
With the following procedure, enter a character using the code table.
A
Click [start] - [All Programs] - [Accessories] - [System Tools] - [Character Map].
B
Point to the desired font name, such as European fonts, and select it.
Combined key operations with the Fn key do not work
z
Check whether [Fn/Ctrl Key] is set to [Replace] in the [Main] menu of the Setup Utility. (
).
Change the setting back to [Normal], or if continuing with [Replace] selected, use Ctrl in place of Fn.
<Only for CF-T8 Series>
Cannot input by touching the display
z
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Install the touchscreen driver
again. (
z
Has the touchscreen driver been properly installed?
Problems with Input