Panasonic CF-W8 - Manual (Page 131)

131
Troubleshooting (Advanced)
Communications with access point are cut off
z Shorten the distance between the computer and the access point, and try the detection again.
z If there are multiple access points aside from the access point to which this computer is connected, confirm that different
channels have been set for each access point.
z Using the CPU Idle Setting to set to [Performance] may improve this problem.
See “A device connected to a PC Card does not operate correctly” ( Î page 127 ).
Cannot set wireless LAN to [Enabled] or [Disabled]
z It may become impossible to set the wireless LAN to [Enabled] or [Disabled] if these settings are changed repeatedly on
the [Network Connections] screen. In this case, restart the computer.
z Press F9 in the Setup Utility. This will restore the Setup Utility’s settings to their default values (except the password set-
tings).
is not displayed (or has disappeared)
z To display , perform the following procedure.
A Click [start] - [Control Panel] - [Network and Internet Connections] - [Network Connections].
B Right-click [Wireless Network Connection], and click [Properties].
C Add a check mark for [Show icon in notification area when connected], and then click [OK].