Printronix T5000e - Manual (Page 51)

RFID CONTROL Submenus
51
RFID CONTROL Submenus
RFID Reader
This menu item enables or disables the RFID encoder. The default
is Enable.
Error Handling
This menu item selects the error handling mode for RFID failures.
The default is Overstrike.
In Overstrike mode, each failed label prints with the Overstrike
pattern and the form retries on a new label until the Label Retry
count is exhausted. At this time, the error message “RFID Error:
Check Media” displays. The failed label will not reprint.
In None mode, no specific action is taken when a tag fails to be
programmed.
In Stop mode, when a tag fails to be programmed, the printer will
halt and display the error message “RFID Error: Check Media.” The
label is discarded and reprinting of the label (if desired) must be
initiated from the host. When the error is cleared, the label with the
failed tag moves forward until the next label is in position to be
printed.
Custom Tag Len 8* 8 to 32
RFID CONTROL
(cont. from previous page)
Notes:
* = Default.
Italicized items are available only when you enable
Admin User in the PRINTER CONTROL menu.
Custom Tag Class Class 1* Class 0 Class 0+