Precor Strength-Training S3.25 - Manual (Page 18)

S3.25 Assembly and Maintenance Guide
page 18
1 2 3 4 5 6
7. Assemble Chest Press Seat
A. Attach the Chest Press Upright to the Chest Press
Seat using
four ¾-inch bolts
four washers
Finger tighten.
B. Attach the middle hole at top of the Chest Press
Upright to the Main Upright using
one 3½-inch bolt
one washer
Finger tighten.
C. Attach the lower hole at the top of the Chest Press
Upright to the Main Upright using
one 3½-inch bolt
one washer
D. Attach the Chest Press Seat to the Chest Press
Base using
one 3-inch bolt
two washers
one locknut
Finger tighten.
E. Wrench tighten all bolts.
F. Attach the Prestretch Tube to the Main Upright
using
two 3½-inch bolts
six washers
Wrench tighten.
G. Wrench tighten all bolts.
Step 7. Assemble Chest Press Seat
F
B
D
2 - 3½" bolts
6 - washers
1 - 3½" bolt
1 - washer
C
1 - 3½" bolt
1 - washer
Main Upright
Chest Press Base
A
4 - ¾" bolts
4 - washers
1 - 3" bolt
2 - washers
1 - locknut
Chest Press
Upright
Chest Press
Seat
Prestretch
Tube
View from behind.