Sony KV-29XL71K - Manual (Page 5)

Overview 5
Overview of the remote control buttons
GB
1 To temporarily switch off the TV:
Press this button to temporarily switch off TV (the standby indicator
on TV
lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being pressed,
the TV switches automatically into standby mode.
2 Selecting the input source:
Press this button repeatedly until the desired input symbol of the source
appears on the TV screen.
3 Selecting channels:
Press these buttons to select channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
4 a) If Media Selector button is switched toTV:
Press this button to watch the last channel selected (provided you watched it
for at least 5 seconds).
b) If Media Selector button is switched to VCR:
For Sony VCR double-digit programme numbers, eg 23, press -/-- first, then
the buttons 2 and 3.
5 This button only works in Teletext mode.
6 Selecting screen format:
Press this button to view programmes in 16:9 mode. Press again to return to
4:3 mode.
7 Selecting Teletext:
Press this button to switch on teletext.
8 a) If Media Selector is switched to TV:
• When MENU is switched on, use these buttons to operate the menu
system. For details refer to “Introducing and using the Menu System” .
• When MENU is switched off, press OK to show a channel overview. Then
press v or V to select the channel and then press the OK button again to
watch the selected channel.
b) If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
1
2
w;
qk
qj
qh
qg
qf
qd
qs
4
6
7
8
0
qa
wa
5
9
3
ql
9 Recording button:
If the Media Selector button is switched to VCR, press
this button to record programmes.
q; Media Selector:
With this remote control you can operate not only this TV
but also the main functions of your VCR or DVD. Switch
on the device you want to operate and next press this
button repeatedly to select the VCR, TV or DVD. A green
light illuminates momentarily.
Before you can control a DVD or VCR using this remote
control, you need to set up the control. For more details,
refer to chapter ‘Remote Control Configuration for VCR
or DVD’.
qa Selecting channels:
Press this button to select the next or previous broadcast
channel.
qs Muting the Sound:
Press this button to mute TV sound. Press again to
restore the sound.
qd Adjusting the TV volume:
Press this button to adjust the volume of the TV.
qf Displaying the menu system:
Press this button to display the menu on the TV screen.
Press again to remove the menu display from the TV
screen.
qg Selecting TV mode:
Press this button to switch off “PIP”, teletext or video
input.
qh Selecting Sound effect:
Press this button repeatedly to change the sound effect.
qj Selecting Picture mode:
Press this button repeatedly to change the picture mode.
qk Displaying on Screen information:
Press this button to display all on-screen indications.
Press again to cancel.
ql Swapping screens:
Whilst you are in “PIP” mode, press this button to swap
the two screens.
w; VCR or DVD on/off:
Press this button to switch on or off your VCR/DVD.
wa PIP (Picture in Picture):
Press this button to watch another source in a small
picture (PIP) within the main TV picture. Press again to
cancel. To select the source you want to watch, refer to
the chapter PIP Input’.
Besides the TV functions, all coloured and green symbol buttons are also used for Teletext operation. For more details,
please refer to “Teletext” section of this instruction manual.
01gb29xl.fm Page 5 Tuesday, March 30, 2004 11:48 AM