Paxar 9430RX User Manual
Page 21
2-8 Configuring the Printer
S e t t i n g t h e D I P S w i t c h e s
Use the DIP switches to set the RS232 communication, IrDA, and optional RF
values. To access the DIP switches, open the battery door and remove the
battery. Turn the printer upside down to easily read the DIP switches.
To activate the DIP switches, turn the printer off and then back on. Gently use
a plastic-tipped object to set the DIP switches. Do not use any metal object!
The communications interface settings must be set as defined in the table.
Select DIP switches 4 through 8 for RS232 and 6 through 8 for IrDA.
1 2 3 4 5 6 7 8
Communication
Interface
RS232
OFF
OFF
OFF
IrDA – Fixed 9600
ON
ON
OFF OFF OFF
IrDA – Variable Baud
ON
ON
OFF ON
OFF
Bluetooth®
OFF OFF ON OFF OFF OFF OFF OFF
Baud Rate
38400
OFF
OFF
19200
OFF
ON
9600
ON
OFF
2400
ON
ON
Parity
None
OFF
OFF
Odd
ON
OFF
Even
ON
ON
Printer Power
Auto
Power
Off
*
ON
Manual
Power
Off OFF
* The printer automatically turns off after 99 sec. (default) or the time set up by the
System Administrator.