Paxar 9430RX - Manual (Page 26)

Creating and Printing Formats 3-3
Syntax ESC-<cmdcs>-<chset>
ESC Starts the command language.
<cmdcs> Character set command. Enter F.
<chset> Character Set. Options:
1 Selects International (ANSI) characters
(default)
2 Selects PC Line-Draw (ASCII) characters.
Example ESC F1
Selects the International (ANSI) character set.
Selecting a Font
For your format’s text, select the font, its size, and style (normal or bold).
Syntax ESC-‘chheight’
ESC-<cmdf>-<font>
ESC-<cmdb>-<bold>
ESC Starts the command language.
‘chheight’ Character Height. Use EXTEND or EXTENDOFF.
1C hex Prints characters twice as high as
normal (EXTEND).
1D hex Prints characters at the normal
height (EXTENDOFF).
ESC Starts the command language.
<cmdf> Font command. Enter k.
<font> Font. Options:
0 Large Rotated (90 degrees clockwise)
1 Large Normal
2 Standard Bold (default)
3 Standard Normal
4 Reduced Bold
5 Reduced Normal