Philips SCD468 - Manual (Page 15)

EN
15
Replacing the parent unit battery pack
If the battery pack needs to be recharged more often than
usual, replace it with a new battery pack. Only use rechargeable
NiMH batteries.
1 Open the battery compartment cover (B-12) of the parent
unit by sliding down the the cover.
2 Disconnect the old battery pack (B-14) from it’s power plug
and remove it.
3 Carefully connect the new battery pack to the power plug
and place inside the battery compartment.
4 Close the battery compartment cover (B-12).
Important information