Installation, Source, Decoder – Philips FTR9964/69S User Manual
Page 12
11
Installation
Source
This menu allows you to select the peripheral you connected to one of the
external inputs.
&
Select
Source
with the cursor right.
é
Press the cursor down to select one of the external inputs.
“
Press the cursor right to enter the list of types of peripherals attached to the
selected input.
‘
Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this source will automatically be
selected when your remote control is in VCR mode, see p. 12, and you press
the w key on the remote control.
Decoder
If a decoder or a descrambler is connected, see p. 28, you can define one or
more programme numbers as decoder programme numbers.
&
Select
Decoder
with the cursor right.
é
Select
Programme
with the cursor down.
“
Select the programme number under which you have stored the programme
coming from your decoder.
‘
Select
Status
.
• Select the input used to connect your decoder:
None
,
EXT1
,
EXT2
.
• Select
None
if you do not want the selected programme number being
activated as a decoder programme number.
Source
EXT1
EXT2
EXT3
EXT4
EXT5
Front
Setup
1008.3 gb /69 08-07-2002 14:20 Pagina 11