Philips FTR9964/69S - Manual (Page 15)

14
Use of the remote control
2 1 3
5 4 6
8 7 9
0 i 0
h
SMART SMART
ACTIVE
CONTROL
h M a
h
Active Control
Active Control is a pro-active and automatic
system.The TV continuously measures and
corrects all incoming signals in order to
provide the best picture possible.
According to the monitor connected (with
or without an Ambient Light Sensor which
measures the light conditions of the room),
the Active Control functionality may differ.
With a monitor without a light sensor:
Press the h button to select the the Active
Control values Off or On .
With a monitor with a light sensor:
Press the h button repeatedly to select the
Active Control values Off , Minimum ,
Medium or Maximum (recommended)
Minimum/On Sharpness, Dynamic
Contrast and Noise Reduction are
controlled automatically
Medium Sharpness, Colour, Dynamic
Contrast and Noise Reduction are
controlled automatically
Maximum Sharpness, Colour, Contrast,
Dynamic Contrast and Noise
Reduction are controlled automatically
Press the cursor in the right direction to
select
INFO .
The Active Control Demo appears.
The picture settings are being adapted
continuously and automatically.
The sliders will be moving, showing how the
TV is tweaking the current picture.
None of the sliders is user controllable.
Press the OK button to switch off the
Demo.
Smart keys
To select predefined picture and sound
settings.
Note: The Smart keys are disabled when a VGA
source is being displayed.
M
Sound
Each time it is pressed, a different sound
setting is selected, corresponding with
specific factory setting of bass and treble.
a
Picture
Each time it is pressed, a different picture
setting is selected, corresponding with
specific factory settings of Contrast, Colour,
Sharpness, Colour Enhancement, DNR and
Dynamic Contrast.
Personal refers to the personal preference
settings of picture and sound selected in the
picture and sound menu.
Remark: the moment you are in a predefined
smart sound or picture setting and you modify a
setting in the picture or sound menu, all values of
the menu will overwrite the previously made
Personal settings. The predefined factory settings
remain unchanged.
Keys in front of the TV receiver box
Should your remote be lost or broken you can still change use the keys in
front of the TV receiver box.
• Press the VOLUME - or + key to adjust the chosen volume.
• Press the CH/PR - and + key to browse through the TV channels or
sources stored and to select them.
• Press the MENU key to summon the main menu.
Use the VOLUME - and + keys to select the menu item.
Use the CH/PR - and + keys to select the TV , (DVD) , ( VCR ), ( Receiver ),
Setup , Install menu or Exit , or to select the submenu items.
Note:
- Sometimes not all the menu items are visible on the screen;
Press the CH/PR + key to reveal all items.
- The Exit menu lets you dismiss the menu. Select Exit and press the MENU key.
MENU
OK
VOLUME
CH/PR
TV
(DVD)
(VCR)
(Receiver)
Setup
Install
Picture Sound Features
1008.3 gb /69 08-07-2002 14:20 Pagina 14