Panasonic CQ-VD6503N - Manual (Page 61)

4
5 CQ-VD6503N
English
<YFX994C134ZA>
Lock Cancel Plate e 2
❏
Installation Hardware
(For Installation)
Note:
¡
The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡ Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
¡ Mounting Collar w is mounted on the main unit at
shipment.
¡ Use the supplied screws for installation exclusively. In
case of losing any of them, please order the specific
screw.
Qty. Diagram Item No.
Trim Plate
<YFC054C088ZA>
q 1
Mounting Collar
<YFX214C437ZA>
w 1
Rear Support Strap
<YEFG044C002>
<ZZBISVD6503>
t 1
Round Head Screw
(5 mmø x 8 mm)
y 2
Flat-Head Screw
(5 mmø x 8 mm)
u 6
<YEJVO1060>
Mounting Bolt (5 mmø) r 1
❏
Transportation Bracket Removal
Be sure to remove the transportation brackets before
use (installation). Use round head screws (5
mm ø x 8
mm) for installation. ( a page 7)
Be careful not to lose these screws.
Round Head Screw (5 mm ø x 8 mm)
Transportation Bracket
❏ Before Installation
Caution
¡ Do not press the panel forcefully.
¡ Do not scratch the panel with fingernails or any hard
objects.
¡ Do not bump the front panel.
a Failure to observe the above may damage or break
the glass on the surface of the touch panel.
❏
Installation Hardware
(For
Wiring )
Qty. Diagram Item No.
Power Connector
(ISO connector)
<YEAJ012891>
i 1
ISO Antenna Adapter
<YEAA33144>
!1 1
Reverse Extension Cord o 1
Clip Connector !0 1