Philips HTS8141/12 User Manual
Page 27
English
EN 27
Pla
y
Access DVD menu
1
Press DISC MENU to access disc main
menu.
2
Select a play option, then press OK.
In some menus, press
•
number buttons
to input your selection.
To return to the title menu during
•
playback, press
BACK.
Access VCD menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in
a VCD, the contents menu is displayed.
1
Press
vV to select a play option, then
press OK to start play.
If PBC is off, it skips the menu and starts
•
play from the À rst title.
During playback, you can press
•
BACK to return to the menu (if the
PBC mode is on).
Tips
The default setting for PBC is on. To change the
•
default setting, see chapter ‘Adjust settings’ -
[ Preference Setup ] > [ PBC ] for details.
Sync audio output with video play
If the video play is slower than the audio output
(sound does not match with the pictures,) you
can delay the audio output to match the video.
1
Press and hold AUDIO SYNC until
‘AUDIO SYNC XXX’ is displayed.
‘XXX’ denotes the delay time.
•
2
Within À ve seconds, press VOL
+- to
set the delay time for audio output.
Note
If the volume control is not used within 5 seconds, it
•
resumes normal volume control function.
1_hts8141_12_eng7_Final_with Dock.indd 27
8/4/2009 2:30:57 PM