Philips HTS8141/12 - Manual (Page 41)

English
EN 41
Ad
ju
st
se
tt
in
g
s
Video setup
1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press
V to select [ Video Setup ], then
press B.
3
Select an option, then press OK.
Video Setup
Picture Settings
Advanced Picture
TV Display
TV Type
Progressive
Closed Caption
Component Video
See the explanations of the above •
options in the following pages.
4
Select a setting, then press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press • OPTIONS.
[ TV Type ]
Change this setting only if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
[ • PAL ] – for PAL-system TV.
[ NTSC ] • – for NTSC-system TV.
[ Multi ] • – for TV that is compatible with
both PAL and NTSC.
[ TV Display ]
Select the screen format according to how you
want the picture to appear on your TV.
4:3 Letter Box (LB) 4:3 Pan Scan (PS) 16:9 (Wide Screen)
[ 4:3 Pan Scan ] • – for standard TV, a
full-height screen display with the sides
trimmed.
[ 4:3 Letter Box ] • – for standard TV, a
‘wide-screen’ display with black bars on the
top and bottom.
[ • 16:9 Wide Screen ] – for wide-screen TV
(frame ratio 16:9).
[ Picture Settings ]
Select a predeÀ ned set of picture colour
settings or customise your personal setting.
[ • Standard ] – original colour setting.
[ Bright ] • – vibrant colour setting.
[ Soft ] • – warm colour setting.
[ Personal ] • – customise the colour setting.
Set the level of brightness, contrast, tint and
colour saturation in the menu, then press
OK.
1_hts8141_12_eng7_Final_with Dock.indd 41 8/4/2009 2:30:59 PM