Panasonic DMC-FZ10GN - Manual (Page 114)

Playback (advanced)
114
Preparation
• Connect the camera to a printer. (P110)
• Set the DPOF print with this camera in advance. (P89)
• Set the paper size and print quality. (Read the printer operating instructions.)
ª DPOF picture
1 Select [DPOF PICTURE].
• Press the [MENU] button, and you
can change the DPOF print setting.
(P89)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
2 Select [YES] and print.
• Press the [DISPLAY] button to print
the date.
• Press the [MENU] button to cancel
printing.
¬Suggestions/Tips ¬
• When the total number of prints
becomes 255 or more, the number of
remaining pictures appears as [---] on
the screen.
• When you set the date print setting by
pressing the [DISPLAY] button, the
date is printed regardless of the date
print setting on DPOF setting. (P93)
• When the printer does not support the
date printing by DPOF setting, the
date may not be printed as it is on date
setting in DPOF setting.
• When you do not set the date print
setting, also check the date print
setting on the printer.
SET
WB
REVIEW
SET
WB
REVIEW
SET SELECT
DIRECT PRINT
SINGLE
PICTURE DPOF
PICTURE
SET
WB
REVIEW
SET
WB
REVIEW
PLS CHECK THE PRINTER
START PRINTING?
DATE DISPLAY
SELECT SET
YES NO
DIRECT PRINT
FZ10-GN.book 114 ページ ２００３年１２月２４日 水曜日 午前１０時３９分