Panasonic DMC-FZ10GN - Manual (Page 14)

Preparation
14
Using the AC Adaptor
You can use the camera without worrying about battery discharge by connecting to
an AC adaptor.
Preparation
• Check that the camera is turned off and that the lens is retracted.
• Close the flash.
1 Connect the AC cable.
2 Open the [DC IN] terminal door.
3 Connect the DC cable.
¬Suggestions/Tips ¬
• Use the supplied DC cable.
If you use other DC cables, it may
cause a malfunction.
• The camera becomes warm during
use. This is not a malfunction.
• Disconnect the AC adaptor and DC
cable when the camera is not in use.
• The battery cannot be charged in the
camera even if the AC adaptor is
connected.
FZ10-GN.book 14 ページ ２００３年１２月２４日 水曜日 午前１０時３９分