Panasonic DMC-FZ10GN User Manual
Page 33
Recording pictures (basic)
33
ª Programme shift
In Programme AE mode, you can
change the preset aperture value and
the shutter speed under the same
exposure. This is called Programme
shift.
By this function, you can make the
background more blurred (by
decreasing the aperture value) or record
the subject in motion clearer (by setting
to slow shutter speed) in Programme
AE mode.
• Press the shutter button halfway and
then press the [EXPOSURE] button
while the aperture value and the
shutter speed appear (for
10 seconds). Then press
2/1 to
activate the Programme shift.
• When the Programme shift is
activated, the Programme shift
indication
1 appears on the screen.
(A): Aperture value
(B): Shutter speed
¬Suggestions/Tips ¬
• Programme shift can be set in Macro
mode (P55) too.
• If the exposure is not adequate when
pressing the shutter button halfway,
the shutter speed turns red.
• When Programme shift can be set,
you cannot switch the flash mode or
set the self-timer. Press the
[EXPOSURE] button to cancel. (P49)
• When 10 or more seconds have
passed after the Programme shift
becomes effective, the status to
activate the Programme shift is
cancelled and returned to the
Programme AE mode. However, the
setting on the Programme shift is
memorised.
• Programme shift is cancelled when
turning the camera off.
• The Programme shift may not be
activated depending on the brightness
of the subject.
EXPOSURE
SET
WB
REVIEW
2304
19
1
P
1/60
F2.8
PROGRAM SHIFT
2304
19
1
P
1/30
F4.0
PROGRAM SHIFT
2 3 4 5 6 7 8 9 10
11
12
13
14
0 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000
2
2.8
4
5.6
8
11
(B)
(A)
FZ10-GN.book 33 ページ ２００３年１２月２４日 水曜日 午前１０時３９分