Philips DCM250/12 - Manual (Page 10)

EN 9
English
3 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect FM antenna
Tip
For optimal reception, fully extend and adjust the •
position of the antenna.
1
Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
FM AERIAL
Connect MW antenna
1
Assemble the MW loop antenna.
2
Connect the MW loop antenna to the
MW AERIAL jack on the rear of the main
unit.
Note
Position the antenna as far as possible from a TV, VCR •
or other radiation source.
MW AERIAL