Philips DCM250/12 - Manual (Page 21)

20 EN
10 Other features
Set the sleep timer
This DCM250 can switch to standby
automatically after a set period of time.
1
When the DCM250 is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
When sleep timer is activated, the
»
display shows [SLEEP](sleep) .
To deactivate sleep timer
1
Press SLEEP repeatedly until “OFF” is
displayed.
When sleep timer is deactivated,
»
[SLEEP](sleep) disappears on the
display.
Set the alarm timer
This DCM250 can be used as an alarm clock.
The DISC, TUNER, USB or iPod is activated to
play at a preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold TIMER.
3
Press CD, USB, TUNER or iPod to select
a source.
4
Press TIMER to confi rm.
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press TIMER to confi rm.
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press TIMER to confi rm.
The timer is set and activated.
»
Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
If the timer is activated, the display
»
shows .
If the timer is deactivated,
»
disappears on the display.
Note
If DISC/USB/iPod source is selected and the track •
cannot be played, tuner is activated automatically.
Listen to an external device
You can also listen to an external audio device
through this unit.
1
Press AUX to select MP3 link source.
2
Connect the supplied MP3 link cable to:
the • MP3 LINK jack on this unit
the headphone jack on the device •
3
Start to play the device. (See the device
user manual)
Listen through headphone
1
Plug a headphone into the socket on
the unit.