Philips DCM250/12 - Manual (Page 12)

EN 11
English
Auto install radio stations
When you connect power and no radio
stations are stored, the DCM250 automatically
begins to store radio stations.
1
Connect the DCM250 to the power
supply.
[AUTO INSTALL - PRESS PLAY] (auto
»
install - press the PLAY button) is
displayed.
2
Press on the main unit to start
installation.
The DCM250 automatically stores
»
radio stations with suffi cient signal
strength.
When all the available radio stations
»
are stored, the fi rst preset radio station
is broadcast automatically.
Set clock
1
In standby mode, press PROG to activate
the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press / to select 12 hour or 24 hour
format.
3
Press PROG.
The hour digits are displayed and begin
»
to blink.
4
Press / to set the hour.
5
Press PROG.
The minute digits are displayed and
»
begin to blink.
6
Press / to set the minute.
7
Press PROG to confi rm.
Turn on
1
Press .
The DCM250 switches to the last
»
selected source.
Switch to standby
1
Press to switch the DCM250 to
standby mode.
The backlight on the display panel is
»
reduced.
The clock (if set) appears on the
»
display panel.
To switch the DCM250 to Eco Power
Standby mode:
1
In standby mode, press and hold for
more than 2 seconds.
The backlight on the display panel
»
turns off.