Philips HD7826 - Manual (Page 10)

2 Press the on/off button 3.
The indicator light blinks slowly while the water is heating up. Heating up
takes approx. 75 seconds.
The coffee machine is ready for use when the indicator light burns
continuously. If the indicator light blinks rapidly, the water reservoir
does not contain enough water for brewing one cup of coffee.
Type HD7826/HD7824 only: the light rings around the 1-cup button
q and the 2-cup button qq/
w
also go on when the machine is
ready for use. If there is not enough water for brewing two cups of
coffee, the light ring around the 2-cup button qq/
w
will not go on
and this button cannot be operated.
 Release the lid by moving the lever upwards.
4 Open the lid.
5 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
If you want to make one cup of SENSEO \ coffee, use 1 coffee pod in
combination with the 1-cup pod holder q and the 1- cup button q.
If you want to make two cups of SENSEO \ coffee, use 2 coffee pods
in combination with the deeper 2-cup pod holder qq and the 2-cup
button qq/
w
.
6 Place the SENSEO
\
coffee pod(s) properly in the center of the pod
holder, with the flat SENSEO
\
side up and the rounded side facing
down.
Note: Use SENSEO \ coffee pods from Douwe Egberts specially designed for
your SENSEO
\
coffee machine for a full and round taste.
Note:Make sure the coffee in the pod(s) is evenly distributed and press the
pod(s) lightly into the pod holder.
Note:Never put normal ground coffee or use torn pods in the SENSEO
\
machine, as this will cause it to become blocked.
Place 1 SENSEO \ coffee pod in the 1-cup pod holder q,
or
,
,
,
,
,
10