Philips HD7826 - Manual (Page 11)

Place 2 SENSEO \ coffee pods in the 2-cup pod holder qq.
7 Close the lid and lock the lever.
Always check if the lid is properly locked. The lever must be pushed down
until it snaps home with a click.
Never start brewing with the lid open. The lid must be properly closed.
8 Place one cup or two cups under the spout openings. You can adjust
the height of the coffee spout by sliding it upwards or downwards.
If you are using cups, make sure they have a capacity of 5 oz. If you are
using a mug, make sure the mug has a capacity of 10 oz. Do not use cups
that are too large, as they will cause the coffee to get cold more quickly.
9 Press the button indicating the number of cups of SENSEO \ coffee
you want to brew.
Press the 1-cup button q for one 4 oz. cup.
Press the 2-cup button qq/
w
for one 8 oz. mug or two 4 oz. cups.
Types HD7826, HD7824 only: the light rings around the 1-cup button q
and the 2-cup button qq/
w
indicate if there is still enough water left for
brewing one or two cups of coffee. If there is not enough water left in the
water reservoir for brewing two cups of coffee, the light ring around the
2- cup button qq/
w
will not go on and this button cannot be operated.
The SENSEO
\
coffee machine starts brewing.
The machine automatically supplies the optimal amount of water.
You can interrupt the brewing process at any time by pressing the
on/off button 3. If you switch the machine back on after having
interrupted the brewing process, the machine will not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this will
cause the machine to draw in air. When this happens, the next cup will
only be partly filled.
Type HD7820 only: if the cups are only half full when the machine stops
brewing, there was not enough water left in the water reservoir to brew
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
-
-
,
-
-
11