Philips HD7826 - Manual (Page 18)

Problem Solution
The Senseo coffee machine
brews only a small quantity
of coffee or no coffee at all
when it is used for the first
time.
You have not flushed the machine properly before first use. As a result,
the boiler is not or not completely filled. Flush the machine properly (see
chapter ‘Preparing the machine for use’) before you brew another cup of
coffee.
The lid cannot be closed
properly.
Check if a used coffee pod is sticking to the water distribution disc. If this
is the case, remove the used pod.
Check if you used the correct pod holder. Use 2 pods in combination
with the deeper 2-cup pod holder qq. Use 1 pod in combination with
the 1-cup pod holder q.
The machine has been
stored in a room that was
not frost-free.
Contact the Philips Norelco Service Location..
The SENSEO
\
coffee is not
strong enough.
Make sure that:
you have used the correct number of pods and have pressed the right
button. Use 1 pod in combination with the 1-cup pod holder q and the
1-cup button q. Use 2 pods in combination with the 2-cup pod holder
qq and the 2-cup button qq/
w
;
the coffee pod(s) have been placed properly in the centre of the pod
holder, to prevent water from escaping along the edge of the pod(s).
When you are using two coffee pods on top of each other, make sure
that the flat SENSEO
\
sides of both pods are facing up and press the
pods lightly into the pod holder;
you have not used the same pod twice by accident;
the coffee in the pod is evenly distributed;
If you prefer a more robust flavour, SENSEO
\
coffee pods with a
stronger blend are available.
The SENSEO
\
coffee is too
strong.
If you prefer a milder flavour, SENSEO
\
coffee pods with a milder blend
are available.
The coffee is not hot
enough.
Do not use cups that are too large, as they will cause the coffee to get
cold more quickly. When using cups, make sure they have a capacity of
5 oz. When using a mug, make sure it has a capacity of 10 oz.
18