Panasonic KX-TG2257S - Manual (Page 26)

26
Day and Time
Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
Ringer pattern
H
Program
--------------
--------------
H
TAD program
Set flash time
--------------
H
Day and time
Remote code
1 Press (FUNCTION/2WAY!REC) .
2 Scroll to “Program” by pressing Ö or Ñ .
3 Press á .
4 Press á at “TAD program”.
5 Press á at “Day and time”.
•“Set time” is announced from the base unit.
If previously adjusted, the day/time will be heard.
6 Enter the current time (hour and minute)
using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
7 Press (*) to select “AM” or “PM”.
Press (#) repeatedly to set the day.
8 Press á (Save key).
•The base unit announces the day/time. The clock
starts working.
•If 6 beeps sound from the base unit, the setting is
not correct. Start again from step 5.
•To exit the programming mode, press (OFF) .
SUN 12:00 AM
#=Day 0-9=Time
=AM/PM
H
=Save
SUN 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
MON 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
Preparing the Answering System
•You can exit the programming mode any time by pressing (OFF) .
•In step 6, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter “0100”, and select “PM” by pressing (*).)
MON 09:30 AM
Make sure the unit is not being used and the handset is lifted off the
base unit.