Panasonic KX-TG2257S - Manual (Page 29)

29
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “Toll saver”
* .
Your phone comes from the factory set to “4”.
1 Press (FUNCTION/2WAY!REC) .
2 Scroll to “Program” by pressing Ö or Ñ .
3 Press á .
4 Press á at “TAD program”.
5 Scroll to “Number of ring” by pressing
Ö or Ñ .
6 Press á .
•The current setting is displayed.
7 Select the number of rings by pressing Ö
or Ñ .
•You can also select the number of rings by
pressing dialing buttons (2) to (7) or (0)
(Toll saver*).
8 Press á (Save key).
•A beep sounds from the base unit.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF) .
*Toll saver
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
Ringer pattern
H
Program
--------------
--------------
H
TAD program
Set flash time
--------------
H
Day and time
Remote code
Remote code
H
Number of ring
Recording time
Number of rings
:4
GF H
=Save
Number of rings
:Toll saver
GF H
=Save
Number of rings
:Toll saver
Make sure the unit is not being used and the handset is lifted off the
base unit.