Panasonic KX-TG5456 - Manual (Page 36)

Programmable Settings
36 For assistance, please visit http://www.panasonic.com/consumersupport
Ringer settings K
Handset ringer volume
4 levels (high/medium/low/off) are
available.
1
Press {MENU} (middle soft key).
2
Scroll to K, then press {SELECT}.
3
Scroll to “Ringer volume”, then press
{SELECT}.
4
Press {V} or {^} repeatedly to select
the desired volume.
L To turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5
Press {SAVE}.
Note:
L When the ringer volume is set to off, the
handset will not ring for outside calls.
The handset will ring at the low level for
intercom calls.
L When the ringer volume is set to off, the
handset will not announce caller names
(page 26).
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones, 4 melodies, and 2 songs.
Important:
L You can record songs for the handset
ringer tone from an audio device. See
“Recording songs from an audio device
for ringer tones” on page 37.
1
Press {MENU} (middle soft key).
2
Scroll to K, then press {SELECT}.
3
Scroll to “Ringer tone”, then press
{SELECT}.
4
To select a tone or melody, scroll to
“Tone & Melody”, then press
{SELECT}.
OR
To select a song, scroll to
“Customized ring”, then press
{SELECT}.
5
Press {V} or {^} repeatedly to select
the desired item.
L If the ringer volume has been turned
off, the handset will not ring.
6
Press {SAVE}, then press {OFF}.
Note:
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody or a song, you will not be able to
distinguish lines by their ringers.
L If you select a melody or a song, the
ringer will continue to sound for several
seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.