Panasonic KX-TG5456 - Manual (Page 52)

Answering System Features
52 For assistance, please visit http://www.panasonic.com/consumersupport
Answering system
settings
J
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
Store any 2-digit number (00–99).
1
Press {MENU} (middle soft key).
2
Scroll to J, then press {SELECT}.
3
Scroll to “Remote code”, then press
{SELECT}.
4
Select the desired remote code by
entering a 2-digit number (00–99).
5
Press {SAVE}, then press {OFF}.
Note:
L To confirm the remote code, repeat
steps 1 to 3. Press {OFF} when finished.
Ring count
You can change the number of times the
phone rings before the unit answers calls.
You can select 2 to 7 rings or “Toll
saver”.
“Toll saver”: The unit answers on the
2nd ring when new messages have been
recorded, and on the 4th ring when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 50), you will know that
there are no messages when the phone
rings for the 3rd time. You can then hang
up without being charged for the call.
1
Press {MENU} (middle soft key).
2
Scroll to J, then press {SELECT}.
3
Scroll to “Ring count”, then press
{SELECT}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {SAVE}, then press {OFF}.
Note:
L Usually the unit will announce the
caller’s name after the 2nd ring. If you
turn on the answering system, and set
the ring count to 2 rings, the unit will not
announce the caller’s name. If “Toll
saver” is selected, and there is a new
message, the unit will not announce the
caller’s name.
For Voice Mail service subscribers
If you subscribe to a flat-rate bundle
service that includes Caller ID, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L To use the Voice Mail service provided
by the telephone company rather than
the unit’s answering system, turn off the
answering system (page 46).
This unit does not have an indicator to
indicate if there are new messages in
your mailbox service.
L To use this unit’s answering system
rather than the Voice Mail service
provided by your telephone company,
please contact your telephone company
to deactivate your Voice Mail service.
If the telephone company cannot do this:
– Set this unit’s “Ring count” setting
so that this unit’s answering system
answers calls before the telephone
company’s Voice Mail service tries to
answer your calls. It is necessary to
check the ring count required to
activate the Voice Mail service
provided by your telephone company
before changing this setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To do
so, consult your telephone company.