Panasonic KX-TG5456 - Manual (Page 41)

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 41
5
Press {SAVE}, then press {OFF}.
Auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit without pressing {C}.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Auto talk”, then press
{SELECT}.
4
Press {V} or {^} repeatedly to select
“On” or “Off”.
5
Press {SAVE}, then press {OFF}.
Note:
L If you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
Handset interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call.
“2”: The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Interrupt tone”, then
press {SELECT}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {SAVE}, then press {OFF}.
Handset display language
You can select either “English” or
“Español” as the display language.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Change language”, then
press {SELECT}.
4
Press {V} or {^} repeatedly to select
the desired language.
5
Press {SAVE} or {GUARDAR}, then
press {OFF}.
Note:
L If you select a language you cannot
read, press {MENU} {#} {1} {1} {0}
{1} {SAVE} to change the display
language to English.
Flash time
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
“100ms”, “110ms”, “250ms”, “300ms”,
“400ms”, “600ms”, or “700ms”.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set tel line”, then press
{SELECT}.
4
Scroll to “Set flash time”, then
press {SELECT}.
5
Press {V} or {^} repeatedly to select
the desired setting.
6
Press {SAVE}, then press {OFF}.
Note:
L The setting should stay at 700 ms unless
pressing the soft key {FLASH} fails to
pick up the Call Waiting call.
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)