Panasonic SC-HC20 - Manual (Page 6)

RQTX1051 RQTX1051
6
ENGLISH
RQTX1051 RQTX1051
Notes on CD-R and CD-RW
This unit can play CD-R and CD-RW recorded with CD-DA or
MP3.
Use an audio recording disc for CD-DA and finalize* it when you
finish recording.
* A process performed after recording that enables CD-R or
CD-RW players to play audio CD-R and CD-RW.
The unit may not be able to play some discs due to the condition
of the recording.
Do not use irregularly shaped CDs.
Do not attach extra labels and stickers.
Do not use CDs with labels and stickers that are coming off or
with excessive adhesive under the labels and stickers.
Do not attach scratch-proof covers or any other kind of
accessories.
Do not write anything on the CDs.
Do not clean CDs with liquids (Wipe with a soft and dried cloth).
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital Audio
(CD-DA) format so play may not be possible.
Creating MP3 files playable on this unit
Maximum number of tracks and albums: 999 tracks and 255
albums.
Compatible compression rate: Between 64 kbps and 320 kbps
(stereo). 128 kbps (stereo) is recommended.
Disc formats: ISO9660 level 1 and level 2 (except for extended
formats).
The time for reading TOC depends on the number of the tracks,
folders or folder structures.
Limitations on MP3
This unit is compatible with multi-sessions and it takes more
time to start playing.
This unit cannot play files recorded using packet write.
If the disc includes both MP3 and normal audio data (CD-DA),
the unit plays the type recorded in the inner part of the disc.
If the disc includes both MP3 and other types of audio data
(e.g. WMA or WAV), the unit plays only the MP3.
Depending on how you create the MP3 files, they may not play
in the order you numbered them or may not play at all.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
 Press [CD q/h].
 Press [PLAY MODE] repeatedly to select the following modes.
Mode To play
1TR
1-TRACK
one selected track on the disc.
Press the numeric buttons to select the track.
1ALBUM
1-ALBUM (MP3)
one selected album on the disc.
Press
[e,r] to select the album.
RND
RANDOM
a disc randomly.
1ALBUM RND
1-ALBUM
RANDOM
(MP3)
all tracks in one selected album randomly.
Press
[e,r] to select the album.
During random play, you cannot skip to the previous track.
The current play mode is cleared when you open the sliding door.
To repeat program play or selected play mode, press
[REPEAT].
Press again to cancel.
•
•
•
Play Mode function
Disc operations
 Press [^] to turn the unit on.
 Press [CD ;, OPEN/CLOSE] on the main unit to open the sliding
door.
 Tilt the disc into the disc tray under the sliding door and then set
the CD in place.
 Press [CD ;, OPEN/CLOSE] to close the sliding door.
Keep fingers away from the sliding door when it is closing to avoid
possible minor injuries.
 Press [CD q/h] to start play.
Damage may occur if the sliding door is forced closed.
Be careful of CD hitting the sliding door while being removed. •
•
Basic play
Enables you to program up to 24 tracks.

Press [CD q/h] and then [g].
 Press [PROGRAM].
CD:  Press the numeric buttons to select the track.
To program more tracks, continue by pressing the numeric
buttons.
 Press [OK] or [CD q/h] to start play.
MP3:  Press [e,r] to select the album.
 Press [y/i] once and then the numeric buttons to select
the track.
 Press [OK].
To program more tracks, repeat step  to .
 Press [CD q/h] to start play.
Cancel program
mode Press [PROGRAM] in the stop mode to clear
“PGM” indicator from the display.
Replay the program Press [PROGRAM] in the stop mode and then
[CD q/h].
Check program
contents Press [u/t] or [y/i] when “PGM” is
displayed in the stop mode. To check while
programming, press
[PROGRAM] twice after
“PGM” appears and then press [u/t] or
[y/i].
Delete last
programmed track Press [DEL] in the stop mode.
Clear all
programmed tracks Press [g] in the stop mode.
“CLR ALL” is displayed. Within 5 seconds,
press the button again to clear all tracks.
The program memory is cleared when you open the sliding door. •
Program play
Stop Press [g].
Pause Press [CD q/h]. Press again to resume play.
Skip track Press [u/t] or [y/i].
Search the current
track
(CD)
Press and hold [u/t] or [y/i].
Skip album (MP3) Press [e,r].
Direct access play
(Play starts with
the track you
select.) CD: Press the numeric buttons to select the track.
MP3:  Press [e,r] to select the album.
 Press [y/i] once and then the
numeric buttons to select the track.
Press [DISPLAY] repeatedly during play or pause to view the
current track’s information.
Maximum number of displayable characters: approximately 30
This unit supports ver. 1.0 and 1.1 ID3 tags. Text data that is not
supported will not be displayed. •
•
Display function
6 7
Click!