Panasonic SC-HC20 - Manual (Page 8)

RQTX1051 RQTX1051
8
ENGLISH
RQTX1051 RQTX1051
 Push to open the dock.
 Insert the suitable dock adapter (not included) for the
iPod /iPhone.
Insert the side of the iPod /iPhone dock adapter with the clips facing
towards you first and then push the opposite side until it clicks into
place.
 Connect the iPod /iPhone (not included) firmly.
Be sure to remove the iPod /iPhone from its case.
To remove, simply pull the iPod /iPhone straight out to disconnect it.
When inserting an iPod /iPhone into the unit, be sure to use the
dock adapter either supplied with the iPod /iPhone or commercially
available from Apple Inc.
When not using the dock, push it back until it locks.
Reduce the volume of the main unit to minimum before connecting or
disconnecting the iPod /iPhone. •
•
•
External unit
Enjoying audio from iPod or iPhone
g Inserting or removing an iPod /iPhone
The remote control and main unit are factory-set to “REMOTE 1” mode.
If you find the remote control unintentionally also controls other
equipment, you can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode (by main unit only)

Press [FM/AM/AUX] to select ‘‘AUX’’.
 Press and hold [FM/AM/AUX] and then press [2] until
“REMOTE 2” is displayed.
 Press and hold [OK] and [2] for at least 2 seconds.
To return to “REMOTE 1” mode
Repeat the steps above but replace
[2] with [1].
(“REMOTE 1” will be displayed.)
Changing the main unit and remote control
mode
8
■ Charging the iPod /iPhone
When iPod /iPhone is being charged in standby mode,
“IPOD CHARGING” is shown on the main unit’s display.
Check iPod /iPhone to see if the battery is fully charged. If you are
not using iPod /iPhone for an extended period of time after recharging
has completed, disconnect it from the main unit as the battery will be
depleted naturally. (Once fully recharged, additional recharging will
not occur.) •
•
Notes on iPhone:
All phone features can only be controled by the iPhone’s touch
screen.
The unit does not display incoming calls or the phone status.
The ringtone of incoming call can be heard from the iPhone’s speaker.
When the unit is in iPod /iPhone mode, the ringtone can also be
heard from the unit’s speakers.
The voice of caller cannot be heard on the unit’s speakers. The user
can use the iPhone internal microphone though.
Connecting or disconnecting the iPhone from the unit will not cancel
a call.
There is no Apple Inc. specification that will guarantee the iPhone
responses above. iPhone responses may vary on new iPhone models
or iPhone new software updates. •
•
•
•
•
•
Play Press [iPod q/h].
Pause Press [iPod q/h] or [g].
Skip track Press [u/t] or [y/i].
Search the current track Press and hold [u/t] or [y/i].
Display iPod /iPhone menu/
return to previous menu Press [iPod MENU] in the play mode.
(Remote control only)
Select contents from
iPod /iPhone menu Press [e,r] and then [OK].
(Remote control only)
■ Compatible iPhone
Name Memory size
iPhone 3GS 16 GB, 32 GB
iPhone 3G 8 GB, 16 GB
iPhone 4 GB, 8 GB, 16 GB
Compatibility depends on the software version of the iPod ® /iPhone. •
PUSH-OPEN
iPod
Push!
■ Compatible iPod
Name Memory size
iPod nano 5th generation (video camera) 8 GB, 16 GB
iPod touch 2nd generation 8 GB, 16 GB, 32 GB,
64 GB
iPod classic 120 GB, 160 GB (2009)
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 160 GB (2007)
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30 GB
iPod 4th generation 40 GB
iPod 4th generation 20 GB
iPod mini 4 GB, 6 GB