Panasonic EB-GD30 - Manual (Page 28)

DISASSEMBLY / REASSEMBLY INSTRUCTIONS
Issue 1 Section 4 MCUK991001C8
Revision 0 – 22 – Service Manual
3. Gently bend the four Display Assembly lugs to allow removal from the Keypad PCB.
Figure 4.7: Display Assembly removal
4.2.4 Case-Mounted Components
1. Remove the keypad by peeling it away from the case front.
Figure 4.8: Removing the keypad
2. Remove the rubber boot which contains the microphone. When refitting, ensure contacts are oriented such that they make
contact with the corresponding printed circuit pads on the Main PCB..
Figure 4.9: Microphone assembly removal