Philips CAR ENTERTAINMENT SYSTEM CE120 - Manual (Page 11)

11
Connector Connect to
1 Antenna Antenna
2 Rear line out
(right) Amplifi er line in
(right)
3 Rear line out
(left) Amplifi er line in
(left)
Connect wires: without ISO
connectors
Caution
Ensure that all loose leads are insulated with electrical
tape. •
1
Cut off the bigger end of the supplied
standard connector.
1 2 3 1 2 3
Connect wires: ISO connectors
Caution
Ensure that all loose leads are insulated with electrical
tape. •
1
Pull out the ISO connectors from car
dashboard and connect them to the bigger
end of the supplied standard connector.
2
Connect the other end of the supplied
standard connector to the unit.
3
Connect the antenna and amplifi er as
illustrated, if applicable.
English
ENG
CE120_IFU_ENG.indd Sec1:11 CE120_IFU_ENG.indd Sec1:11 2008-10-10 14:37:15 2008-10-10 14:37:15