Philips CAR ENTERTAINMENT SYSTEM CE120 - Manual (Page 15)

15
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
Turn on
1
Press to turn on the unit.
To turn off the unit, press for 3
seconds.
Set clock
1
Press MENU / DISP for 3 seconds.
2
Press DBB or SEARCH repeatedly until
the currently clock is displayed.
3
Turn in clockwise direction to set hour.
4
Press to confi rm.
5
Turn in anti-clockwise direction to set
minute.
6
Press to confi rm.
View clock
1
Press MENU / DISP repeatedly until the
clock is displayed.
•
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate. •
•
•
•
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
English
ENG
CE120_IFU_ENG.indd Sec1:15 CE120_IFU_ENG.indd Sec1:15 2008-10-10 14:37:21 2008-10-10 14:37:21