Pride Mobility Jazzy 1113 User Manual

Page 45

Advertising
background image

US Jazzy 1113/Rev I/Feb03

www.pridemobility.com

45

I X . B A T T E R I E S A N D C H A R G I N G

How can I get maximum range or distance per charge?

Rarely do you have an ideal driving situation such as smooth, flat, hard terrain with no hills or curves. More often

you are presented with hills, sidewalk cracks, uneven and loosely packed surfaces, and curves. All of these factors

affect the distance or running time per battery charge. The following are a few suggestions for obtaining the maximum

range per charge:

n Always charge the batteries fully prior to your trip.

n Maintain 30-35 psi in pneumatic drive tires.

n Plan your trip in advance to avoid inclines if possible.

n Limit the baggage weight to essential items.

What type of battery should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep-

cycle batteries and are similar in performance.

Use these specifications to reorder deep-cycle batteries.

Battery Specifications

Type:

Deep-Cycle AGM or Gel-Cell

Size:

U1

Voltage:

12 volts each

Amp Hours:

35 amp hours

WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batteries

to reduce the risk of leakage or explosive conditions.

Why do my new batteries seem weak?

Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium (nicads),

or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down

their charge, and then accept a relatively quick recharge. Lead acid batteries should be charged as often as

possible. They do not have a “memory” like nickel-cadmium batteries.

We work closely with our battery manufacturer to provide a battery that best suits the Jazzy 1113’s specific

demands. Fresh batteries arrive regularly and are promptly shipped with a full charge. During shipping, the batteries

encounter temperature extremes that may influence their initial performance. Heat robs the charge from the battery,

and cold slows the power available and extends the time needed to recharge the battery (just as with a car battery).

It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient temperature.

More importantly, it takes a few “charging cycles” (a partial drain, then a full recharge) to establish the critical

chemical balance that is essential to the battery’s peak performance and long life. It is well worth it for you to take

the time to break in the batteries properly.

Remember: The useful life of a battery is quite often a reflection of the care it receives.

Advertising