Installation of the unit – Panasonic DMP-B15 User Manual

Page 10

Advertising
background image

RQT9334

(ENG)

10

Installation of the unit

Open the stand and set the unit on a horizontal and stable level
surface.
Open the stand until the stopper wire is fully

stretched.

If the screen is rotated when the unit is

turned on, the display on the screen will
disappear and the unit will be automatically
turned off. (

> 12)

The unit cannot be turned on in situations

other than

3 or 4 above or when the screen

is rotated. (

> 12)

Rotating the screen without opening the angle enough

may scratch the area around the LCD etc. (

> 5, “Rotating

the screen”)

≥The unit’s speakers do not have magnetic shielding. Do not

place the unit near televisions, personal computers or other
devices easily influenced by magnetism. Do not keep this unit
and magnetized cards (bank cards, commuter passes, etc.)
close together.

When moving the unit:

≥Turn the unit off.
≥Close the screen and the stand.
≥Do not hold onto the screen or the stand.

About the LCD screen

There may be 0.01% or less chance of missing or constantly
turned on pixels, but this is not a malfunction.

Attention

Do not place the unit with the LCD display-side down when the
screen is open.
Doing so may scratch the surface of the LCD as the display
and the area around the display are specially-processed.

1 Open the screen.

3 Turn the screen

outwards and close.

2 Rotate the screen.

4 Open the stand and

set the unit vertically.

DMPB15P-RQT9334_eng.book 10 ページ 2009年3月28日 土曜日 午後2時39分

Advertising