Panasonic DMP-B15 - Manual (Page 25)

Co
n
n
e
c
ti
o
n
P
lay
b
a
ck
RQT9334
(ENG)
25
Co nnection Using this unit with other
equipment
It is possible to enjoy the video and audio of this unit on the TV
and amplifier, or to enjoy the video from other video devices on
the LCD screen of this unit.
≥Turn off all equipment before connecting and read the
appropriate operating instructions.
≥Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
It is possible to enjoy the high quality video and audio of this
unit on the large screen by connecting this unit with the TV
using a single cable.
≥Linked operation is possible by connecting to a
Panasonic TV (VIERA) or amplifier that is compatible with
the VIERA Link (HDMI) function. (
> 26)
Preparation
Connect the devices to the unit.
You can enjoy the high quality surround audio in Dolby Digital
Plus, Dolby TrueHD, and DTS-HD by connecting this unit to the
HDMI compatible multi-channel amplifier. (
> 37) (Only when
connected to an amplifier compatible with each audio)
1
Turn on the power of the connected device
(TV, etc.), and switch the input.
Example: Set the input to “HDMI” or similar (the name of
input may be different depending on the connected
device).
2
Start playback on this unit.
Video and audio are output from the connected device.
≥The quality of video will lower on the screen of this unit when
HDMI is connected, but it is not a malfunction.
Preparation
Connect a TV or a projector to this unit.
* The video input (yellow) plug on the Audio/Video cable (included)
is not used when connecting to an amplifier or similar.
1
Turn on the power of the connected device,
and switch the input.
Example: Set the input to “Video 2” or similar (the name of
input may be different depending on the connected device).
2
Start playback on this unit.
Preparation
Connect the video device to this unit.
Press [AV SELECT] to switch to “AUX”.
≥Operate playback using the connected equipment. (Please
read the operating instructions for the connected equipment)
≥The unit does not turn off automatically even when “Auto Power Off” is
set to “On” ( > 36). Turn the unit off when you have finished using it.
≥To adjust the pictures on the LCD screen (> 13)
≥Audio/Video cable (included) is designed only for use with
this unit. Video and audio may not playback correctly if it is
used with other equipment.
≥If you raise the volume on the television while playing this
unit, the volume may abruptly become very loud when you
switch to a television broadcast. Return the volume to its
normal level before changing.
Connection with the HDMI cable
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting
1080/24p signal (
> 34, “HDMI Resolution”), please use
HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.),
RP-CDHG20 (2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.),
RP-CDHG50 (5.0 m/16.4 ft.), etc.
≥This unit incorporates HDMI (x.v.Color TM , High Bit rate Audio)
technology. ( > 49)
AV OUT
HDMI IN
Television
HDMI cable
(not included)
Connection with the Audio/Video
cable
Enjoy video and audio on other devices
Enjoy video and audio from other devices on
this unit
AV
IN/OUT
VIDEO IN
AUDIO IN
(Yellow)*
(White)
(Red)
L
R
Television or projector
Audio/Video cable
(included)
VIDEO OUT
AUDIO OUT
(Yellow)
(White)
(Red)
L
R
e.g. VCR
Audio/Video cable
(included)
DMPB15P-RQT9334_eng.book 25 ページ ２００９年３月２８日 土曜日 午後２時３９分