Indicators and screen messages – Panasonic DMP-B15 User Manual

Page 40

Advertising
background image

RQT9334

(ENG)

40

R eference

Indicators and screen messages

Indicators

Screen messages

The

[

Í]

indicator flashes

rapidly.

≥The unit has malfunctioned. Consult your dealer.

The

[

Í]

indicator flashes

slowly.

≥“Monitor” on LCD Menu is “Off” (no image). Turn the unit off when no image is being played.

The [CHARGE] indicator
flashes rapidly.

≥There is a problem with the battery pack. Turn the unit on and check the message on the

LCD. (

D below, 41)

The [CHARGE] indicator
flashes slowly.

≥Battery pack charge is low. The unit will turn off automatically after a few minutes.

Cannot read. Please check the
disc.

≥Clean the disc. (> 5)
≥You inserted a disc that has not been finalized. (> 6)

ERROR U580

≥A problem has occurred with the battery pack. Consult your dealer.

ERROR U581

≥The battery pack has been recharging but has failed to recharge for some reason. Recharge

again.

ERROR U582

≥You are recharging in a location that is too hot or too cold. Recharge at normal temperature

[

i5 to i35 oC (i41 to i95 oF)].

PLEASE WAIT

≥The unit is starting up. Wait until the display disappears.

F99

≥The unit is not operating correctly. Press [POWER Í/I] on the unit for 3 seconds or longer

and turn off the unit. Then, turn on the unit again by pressing [POWER

Í/I].

U72
U73

≥There was a problem when connecting the HDMI.

j Connected device is not compatible with HDMI.
j Use a cable with an HDMI logo.
j The HDMI cable is damaged.

U76

≥BD-RE, BD-R, BD-Video or DVD Video with copyright protection cannot be played back

since the device connected to the HDMI terminal is not compatible with the copyright
protection.

U77

≥Video cannot be output since the copyright protection information on the BD-RE, BD-R, BD-

Video or DVD Video being played back is not valid.

F

∑∑

H

∑∑

(

∑∑ stands for a number.)

≥A problem has occurred. (Numbers following the “F” or the “H” will be different depending on

the status of the unit) Turn off the unit once, and turn it back on. Alternatively, turn off the
unit, disconnect the AC adaptor and the battery pack, and attach them back again.

Authorization Error.
This unit is not authorized to
play this title.

≥[DivX]: You are trying to play the DivX VOD content that was purchased with a different

registration code. You cannot play the content on this unit. (

> 20)

Cannot play.

≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). (> 6)

Cannot display on this unit.

≥You tried to play a non-compatible image. (> 38)
≥Re-insert the SD card.

No disc is inserted.

≥The disc may be upside down.

Rental Expired.

≥[DivX]: The DivX VOD content has zero remaining plays. You cannot play it. (> 20)

$ This operation is not
available.

≥Some operations are unsupported by the unit. For example;

j [BD-V]: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

$ This operation is prohibited
by this disc.

≥Depending on the disc, you may not be able to perform search or skip when film previews

and warning screens are being played back.

Cannot connect.
Please check the connection of
the LAN cable.

≥When a hub is used but its Link lamp does not light up, check the cable connection, LAN

terminal connection, cable itself (a crossover cable may have been used by mistake), etc.
(

> 28)

IP address is not set.

≥The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”,

“Subnet Mask”, and “Default Gateway”. (Select the automatic address acquisition if
necessary.) (

> 29)

Cannot obtain IP address using
DHCP.
Please check the connection or
router settings.

≥If you use a hub, then check the connection between the hub and the router.

j Use the UPLINK port of the hub to connect to a router. (> 28)
j Check whether or not the hub’s Link lamp lights up. If it does not light up, then check the

cable connection, LAN terminal connection, cable itself (a crossover cable may have
been used by mistake), etc.

≥If the above conditions are OK, then the router may not operate in DHCP mode. Check the

router settings and operation. You may reset the router to restore it to normal. (

> 29)

DMPB15P-RQT9334_eng.book 40 ページ 2009年3月28日 土曜日 午後2時39分

Advertising