Panasonic CQ-VD7003U - Manual (Page 17)

16
17 CQ-VD7003U
English
CAR AV
MUTE
ENT
VOL
SRC
PWR
DVD MENU
RET
RETURN
TOP MENU
ENTER / BAND
MUTE SRC MUTE SRC
VOL
[SRC] (PWR: power)
[MUTE]
[] ] [[ ]
[ + ] [ – ]
q Press and hold for more than 2 sec-
onds.
w Press to adjust. Setup is the same as
from MENU. Refer to
(display unit) for details. (
a page 32)
DISPLAY UNIT
Operations
DVD VTR
RADIO CH-C
END
– –
[]] or [[]
–
–
–
–
or
q [
+ ]
w [
– ]
q Up
w Down
w q
Volume
Note:
¡The sound level for
each source is
stored in memory.
[TILT]
[]] or [[]
To raise the display, press again.
Tilt Angle
Folding Down the
Display
Temporarily [TILT]
Mutes the sound.
To cancel, press again.
[MUTE] [MUTE]
Mute
Note:
¡
Vertical angle (TILT) is saved in the memory, so when the display unit is drawn out
next, it is automatically set at the angle and in the position adjusted before.
¡ After adjusting its angle, adjust the brightness as well. ( a page 34)
¡ The car model and installation conditions may impose some restrictions on the
adjustment of the monitor's angle.
Note:
¡Even when the unit power is off, you can fold down the display te
mporarily.
Setting Range: – 82 dB to 0 dB, default: – 40 dB
Note:
¡ The volume level can be set independently for each source and each
disc format.
Caution
¡Avoid physical shock to the monitor.
¡Do not place any object on the display unit, or subject it to undue force.
¡Do not move the display forcibly.
¡The monitor movable range may be limited by the type of car, the position where
the display is mounted, etc.
Warning
¡Do not touch the unit while the display is moving. Inserting hands, fingers or for-
eign objects into the unit can cause injuries and damage to the unit.
General Operations (continued)