Panasonic CQ-VD7003U - Manual (Page 28)

27
28 CQ-VD7003U
English
AV1/AV2
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). ( a page 39) (AV set to NAVI
INPUT is not skipped even if is set to
.)
¡If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡AV terminal is not used for the Panasonic car
navigation system (available in future). Refer to
for setting. ( a System Upgrade
Guidebook)
NAVI SETUP
ON
SOURCE SKIP
ENTER
TILT O / C ASP
MUTE SRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE ASPECT
PWR
VOL
P·MODE
CLOSE
CQ-VD7003U
TILT
TEXT
SRC
Preparation:
¡Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel.
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
AV Mode Selection
Press [SRC] to change to the desired
mode.