Panasonic CAMERA MANAGEMENT SYSTEM BB-HGW700A - Manual (Page 25)

25 [For assistance, please call: 1-800-272-7033]
Installation/Troubleshooting
• A blue unmarked window is displayed
when the camera is outside operation
time. If a blue unmarked window is
displayed even when the camera is
operating, click [Refresh Camera].
(A blue unmarked window may be
displayed when authentication is being
confirmed.)
• If the camera and this product are
disconnected while sending or
receiving data, a key mark (when
camera authentication is set up) or a
blue unmarked window is displayed. In
this case, after checking that the
camera's power supply and
connections are correctly inserted, click
[Refresh Camera].
5.
Install the camera
• See the Operating Instructions of each camera for details of how to install the camera.
• When using a wireless camera, remove the AC adaptor from the outlet, remove the Ethernet
cable, and install the camera in the wireless mode.
• See page 39 in Operating Instructions on the CD-ROM for details of the automatic camera
setup function.