Panasonic DMC-FZ18 - Manual (Page 112)

Connecting to other equipment
112
VQT1F83
• If you use “Windows 98/98SE/Me”,
download “QuickTime 6.5.2 for Windows”
from the following site, and install it.
http://www.apple.com/support/downloads/
quicktime652forwindows.html
• This software is installed as standard on a
“Macintosh OS”.
w Folder Composition
Folders are displayed as shown in the
following illustration.
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
• To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu.
w Conditions under which a different
folder number is used
In the following cases, the picture is not
recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
When the folder just recorded to
contains a picture file with the number
999 in it (example: P1000999.JPG).
When the card just recorded to
contains, for example, a folder with the
number 100 [100_PANA] in it and that
card is removed and replaced with a
card that has a folder with the number
100 in it recorded by a camera from a
different maker (100XXXXX, with
XXXXX being the name of the maker)
and then a picture is recorded.
When recording after selecting
[NO.RESET] from the [SETUP] menu.
(Pictures will be recorded to a new
folder with a number sequential to the
folder recorded to immediately before.
By using [NO.RESET] on a card that
does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)
w About the PTP connection
If the OS is “Windows XP”,
“Windows Vista” or “Mac OS X”, you can
connect in PTP mode if you set the camera
to [
] mode and then connect to your
PC.
• Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
• Do not use any other USB connection
cables except the supplied one.
• Do not disconnect the USB connection
cable while [ACCESS] is displayed.
• When there are many pictures on the
built-in memory or the card, it may take
some time to transfer them.
• You may not be able to play back motion
pictures on the built-in memory or the card
Folder number
File number
JPG: Pictures
MOV: Motion pictures
RAW: Pictures in RAW files
MISC: DPOF print
Favorite
Category slide show
PRIVATE1: Pictures recorded in
flip animation function
PRIVATE1
≥Built-in memory
≥Card
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
2 3