Panasonic DMC-FZ18 - Manual (Page 15)

Preparation
15
VQT1F83
Inserting and
Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• Close the flash.
• Prepare a card. (optional)
• You can record or play back pictures
on the built-in memory when you are
not using a card.
1 Slide the card/battery door to
open it.
• Always use genuine Panasonic
batteries (CGR-S006A).
• If you use other batteries, we cannot
guarantee the quality of this product.
2 Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever
in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
• Do not touch the connection terminals
of the card.
• The card may be damaged if it is not
fully inserted.
3 :
Close the card/battery door.
:
Slide the card/battery door to the
end and then close it firmly.
• If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
• Remove the battery after use.
• Do not remove the battery with the
camera turned on since the settings on
the camera may not be stored properly.
• The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
• Do not insert or remove the battery or
the card while this unit is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed. (P24)
• We recommend using a Panasonic
card.