Panasonic DMC-FZ18 - Manual (Page 21)

Preparation
21
VQT1F83
pictures with audio (P77). (The pictures
are not enlarged.)
• When the quality is set to [RAW] or
[RAW
KJPEG], the auto review function
works until the end of recording onto the
card. (The picture is not enlarged.)
• The auto review setting is disabled when
using auto bracket or burst mode, in
motion picture mode [
], when
[AUDIO REC.] is set to [ON] or when the
quality is set to [RAW] or [RAW
KJPEG].
• In intelligent auto mode [ ], the auto
review function is fixed to [1SEC.].
[POWER SAVE]
(Turning off this unit automatically.)
Press [
] to display the [SETUP] menu
and select the item to set. (P19)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[1MIN.], [2MIN.], [5MIN.], [10MIN.], [OFF]
• Press the shutter button halfway or turn
this unit off and on to cancel power save
mode.
• In intelligent auto mode [ ], power save
mode is fixed to [5MIN.].
• Power save mode is not activated in the
following cases.
– When using the AC adaptor
(DMW-AC7PP; optional)
– When connecting to a PC or a printer
– When recording or playing back motion
pictures
– During a slide show
[WORLD TIME] (P69)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the time in your home area and travel
destination.
[CUST. SET MEM.]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
The current camera settings are registered
in [
], [ ] or [ ]. (P55)
[ ], [ ], [ ]
[MONITOR/VIEWFINDER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
You can adjust the brightness of the
monitor or the Viewfinder in 7 steps.
[GUIDE LINE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the pattern of the guide lines displayed
when taking pictures.
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed. (P36, 38)
• In intelligent auto mode [ ], the guide
lines and histogram are not displayed.
[TRAVEL DATE] (P67)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[PLAY ON LCD] (P37)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
If you selected the Viewfinder in a
recording mode, the display will
automatically switch to the LCD monitor
when reviewing or playing back the
pictures.
[ON], [OFF]
[ ]: Travel destination area
[ ]: Your home area
MENU
SET
MENU
SET
[REC. INFO.]: [ON]/[OFF]
[HISTOGRAM]: [ON]/[OFF]
[PATTERN]: [ ]/[ ]
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET