Pioneer DVH-P4100UB - Manual (Page 22)

% During playback, press BOOKMARK at
the point you want to resume playback
next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold
BOOKMARK during playback.
# You can also bookmark a disc by pressing and
holding
EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT.
Specifying title
! This function is available for DVD.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Specifying track
You can use the search function to specify a
track to search for a desired track.
! This function is available for Video CD.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
track number when the disc is stopped.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Searching for the part you
want to play
You can use the search function to find the
part you want to play.
! Chapter search and track search are not
possible when disc playback has been
stopped.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! To perform this function, set the remote
control to DVH mode.
1 Press DIRECT.
2 Press 0 to 9 to input the desired num-
ber.
# To cancel the inputted numbers, press CLEAR.
3 Press DIRECT.
This starts playback from the selected part.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
Note
With discs featuring a menu, you can also press
MENU or TOP MENU and then make selections
from the displayed menu.
Changing audio language
during playback (Multi-audio)
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.
! This function is available for DVD and DivX
disc.
Operating this unit
En
22
Section
02