Available accessories bluetooth adapter, Digital signal processor, Introduction of dsp adjustments 52 – Pioneer DVH-P4100UB User Manual

Page 52: Bluetooth adapter, Available accessories, Introduction of dsp adjustments

Advertising
background image

Bluetooth adapter

You can use this unit to control a Bluetooth
adapter, which is sold separately.
For details concerning operation, refer to the
Bluetooth adapter

’s manuals. This section

provides information on Bluetooth telephone/
audio operations with this unit which differs
from that described in the Bluetooth adapter

’s

manual.
! In some countries, CD-BTB200 is not sold

on the market.

! This unit is a head unit group 1 unit.

— But the selecting a function operation is

the same as that of the head unit group
2.

— When a phone call ends, the system re-

turns to the previous source.

— When a call comes in during sources

other than Bluetooth telephone/audio
source and the call is being carried on,
you cannot use

BAND/ESC to switch

Bluetooth telephone and Bluetooth
audio.

Digital Signal Processor

You can use this unit to control multi-channel
processor (DEQ-P6600), which is sold sepa-
rately.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.

1

Setting the speaker setting

2

Using the position selector

3

Auto TA and EQ (auto-time alignment and auto-
equalizing)

4

Adjusting the time alignment

5

Adjusting the speaker output levels using a
test tone

6

Selecting a cross-over frequency

7

Adjusting the speaker output levels

8

Adjusting 3-band parametric equalizer

Introduction of DSP adjustments

1

Press MULTI-CONTROL to display the

main menu.

2

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-
lect.

3

Turn MULTI-CONTROL to select the

audio function.
FADER (balance adjustment)

—POSI (position

selector)

—PLII (Dolby Pro Logic II)—PANO

(music mode adjust)

—OFF (sound field con-

trol)

—Lo/Ro (down mix)—DRC (dynamic

range control)

—DIRECT (direct)—SLA (source

level adjustment)

—AUTO EQ (auto-equalizer

on/off)

—FRONT (speaker setting)—HPF

(cross-over frequency)

—FRONT-L (speaker

output level)

—TEST TONE (test tone)—

INITIAL (time alignment mode)

—FL (time

alignment adjustment)

—POWERFUL (equali-

zer recall)

—PEQ (3-band parametric equalizer)

# You can also use A.MENU on the remote con-
trol to select an audio menu.

Available accessories

En

52

Section

03

Advertising