Philips LX700 - Manual (Page 13)

13
English
Others Functions
System Setup
The system setup enables you to customize the Receiver. You
can adjust the following features:
Center Delay
– If the listening position is closer to the center speaker
than the front speakers, you can set the center delay time to
improve the center sound effect.
– Options : 5ms, 3ms, 2ms, 1ms, OFF.
Rear Delay
– If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the rear sound effect.
– Options : 15ms, 12ms, 9ms, 6ms, 3ms OFF.
Test Tone
– If set to ON, the system will test the speaker settings.
– The test signal is generated through the left, center, right,
and surround speakers. The default setting is OFF.
Digital Input
– Digital input selection enables you to specify the digital
source to be recorded at the Digital output of the Receiver.
– Options: COAXIAL or OPTICAL
Menu OFF
Select this function to turn off the System Setup and go back
to normal function.
O THERS F UNTIONS
To enter System Setup,
1 Press PROGRAM on the Receiver for 5 seconds to enter
the navigation menu.
2 Press
S / T on the Receiver to toggle through the
functions ( TEST TONE, CENTER DELAY, REAR DELAY,
DIGITAL INPUT ) and select your preferred option.
3 Press PROGRAM again to confirm the selection.
4 Adjust the VOLUME on the Receiver to select your
preferred option.
5 Press PROGRAM to confirm the selection.
Notes
If no button is pressed within 5 seconds during System Setup, it
will return to normal function.