Philips LX700 - Manual (Page 6)

6
English
C
5 7 8 9 0 6
1 3 2 4
6 CHANNEL INPUT
1 SURROUND
– to select multichannel surround(Dolby Digital, DTS,
Dolby Pro Logic or Dolby Pro Logic II) or stereo
sound effect.
2 TUNING S T
– to select the tuner frequency.
3 BASS
– to select bass adjustment mode.
4 TREBLE
– to select treble adjustment mode.
5 STANDBY ON y
– to switch between power on and standby mode.
6 DISPLAY SCREEN
– shows the status of the system.
7 PROGRAM
– in Tuner mode, to program MW/FM stations.
8 SOURCE
– to select the desired source or external input source
(TV/AV, DISC DI, DISC 6CH, TUNER or AUX).
9 VOLUME
– to adjust the master volume.
0 PHONE
– to connect headphones.
Functional Overview
Front and Rear panels
F UNCTIONAL OVERVIEW
1 DIGITAL OUT
– connect to the digital inputs of an external audio
equipment.
– is active only when receiving input from DIGITAL IN
(Coaxial or Optical).
2 WOOFER LINE OUT
– connect to an active subwoofer (optional).
3 SPEAKERS
– connect to the front,center, surround and subwoofer
speakers.
4 DVD/SACD IN
– connect from the 6 channel output of a DVD or SACD
player.
5 AC POWER CORD
– connect to a standard AC outlet.
Caution: Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
6 MW / FM
– connect to the MW loop antenna or FM antenna
7 DIGITAL IN
– connect from audio equipment with digital (Coaxial or
Optical) audio output.
8 AUDIO IN (TV/AV, AUX)
– connect from the analog audio outputs of a TV or
other equipment.
9 AUDIO OUT
– connect to the analog audio inputs of an external
recording device or amplifier.
+ +
AC MAINS ~
7 8 9 6
1 2 3 4 5