POLAR FS3c - Manual (Page 14)

43 ENGLISH
When the desired value is on the display, wait until the
wrist unit goes to minutes setting.
5. Minutes fl ash on the display.
4.2 DATE SETTING (FS2c/FS3c)
The date is displayed differently depending on which time
mode (12h or 24h) has been chosen.
12h time mode: 24h time mode:
MONTH - DAY DAY - MONTH
1. In the Time of Day display, press the front button until
DATE is displayed. Wait for three seconds to enter the
date
settings.
2. The value for the month (in 12h time mode) or the day
(in 24h time mode) is fl ashing.
When is on the display,
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
after two seconds.
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode
after two seconds.
When the desired value is on the display, wait until OK? is
displayed. To approve your choice, press the front button.
The wrist unit will return to the Time of Day display.
When is on the display,
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
after two seconds.
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode
after two seconds.