ProForm Recoil PFCCSY2926.1 User Manual
Page 12
12
19. Slide four Foam Pads (32) onto the Pad Tube
(35) and the Leg Lever (9).
20. Set the Seat Frame (8) onto the Upright Base (5).
21. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
next page.
32
19
20
32
32
32
9
35
8
5
17. Attach the Seat (31) to the Seat Frame (8) with
two M6 x 76mm Screws (64) and two M6
Washers (60).
Attach the Bumper (36) to the Seat Frame (8)
with an M4 x 16mm Screw (61).
Insert the Pad Tube (35) into the Seat Frame (8).
18. Grease an M10 x 62mm Button Bolt (75). Attach
the Leg Lever (9) to the Seat Frame (8) with the
Button Bolt and an M10 Nylon Locknut (56).
Do
not overtighten the Nylon Locknut; the Leg
Lever must be able to pivot easily.
31
8
61
36
64
17
18
35
60
8
9
75
Grease
56