ProForm Recoil PFCCSY2926.1 - Manual (Page 5)

5
M6 Washer (60)
M8 Washer (54)
M8 Nylon Locknut (57)
M10 Washer (59)
M10 Nylon Locknut (56)
M10 x 81mm Button Bolt (68)
M10 x 41mm
Button Bolt (71)
M8 x 100mm Button Bolt (70)
M4 x 12mm Flat
Head Screw (58)
M4 x 16mm
Screw (61)
M4 x 50mm Screw (66)
M6 x 76mm Screw (64)
M10 x 76mm Button Bolt (65)
M10 x 51mm Button Bolt (74)
M10 x 62mm Button Bolt (75)
M10 x 132mm Button Bolt (69)
M10 x 52mm Patch Screw (80)
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST on page 17.
Note: Some small parts may have been
pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.