Press [ w , q ] to select “yes” and press [enter, Press [ w , q ] to select “start” and press [enter, Press [enter – Panasonic DIGA DMR-ES15 User Manual

Page 37

Advertising
background image

RQT8317

37

You can select whether to show the top menu after finalizing. Make
selections before finalizing the disc.

After performing steps 1–3 (Ô page 36)

4

Press [e,r] to select “Auto-Play

Select” and press [ENTER].

5

Press [e,r] to select “Top Menu” or

“Title 1” and press [ENTER].

Finalize the disc so you can play it on other DVD equipment. The
equipment must be able to play finalized discs. To check
compatibility with other equipment, refer to page 4.

After performing steps 1–3 (Ô page 36)

4

Press [e,r] to select “Finalize” and

press [ENTER].

5

Press [w,q] to select “Yes” and press

[ENTER].

6

Press [w,q] to select “Start” and

press [ENTER].

• Finalizing starts. You cannot cancel finalizing.
• Finalizing can take a few minutes, up to a maximum of 15

minutes, depending on the remaining space on the disc.
(

up to 60 minutes.)

Do not disconnect the AC mains lead while finalizing. This
will render the disc unusable.

7

Press [ENTER].

• You cannot finalize discs recorded on other manufacturers’

equipment.

• Discs finalized on this unit may not be playable on other players

due to the condition of the recording.

• When finalizing a high-speed recording compatible disc, it may

take longer than displayed on the confirmation screen
(approximately four times).

+RW discs contain no Top Menu data. Top Menu is a convenient
function. We recommend you to create the menu before playing a
+RW disc on other equipment.
You cannot use Top Menu for playing on this unit.

After performing steps 1–3 (Ô page 36)

4

Press [e,r] to select “Create Top

Menu” and press [ENTER].

5

Press [w,q] to select “Yes” and press

[ENTER].

6

Press [w,q] to select “Start” and

press [ENTER].

Creating Top Menu starts. You cannot cancel creating.
Creating Top Menu can take a few minutes.

7

Press [ENTER].

Recording or editing on the disc may delete the menu. In that case,
create the menu again.

DVD-R DL and +R DL discs have two layers of recording surface on
one side. This unit does not offer seamless recording on two layers.
Recording stops when space on the first layer becomes full. You
must close the first layer to start recording on the second layer.
Closing makes the first layer unavailable for recording (editing is still
available). You cannot cancel closing. Make certain before
proceeding.

After performing steps 1–3 (Ô page 36)

4

Press [e,r] to select “Close First

Layer” and press [ENTER].

5

Press [w,q] to select “Yes” and press

[ENTER].

6

Press [w,q] to select “Start” and

press [ENTER].

Closing the layer starts. You cannot cancel closing.
Closing the layer can take several minutes, up to a maximum
of 30 minutes, depending on the remaining space on the first
layer.

Do not disconnect the AC mains lead while closing the

layer. This will render the disc unusable.

7

Press [ENTER].

• You cannot close the first layer when it has no recording.
• By closing the layer, you can record or edit discs that have been

recorded on the second layer by other equipment.

n

To confirm the layer you can record

You can confirm the remaining recording time on the layer you
can record.

Selecting whether to show the Top

Menu first

–Auto-Play Select

Top Menu: The top menu appears first.
Title 1:

The disc content is played without displaying the

top menu.

Enabling discs to be played on other

equipment

–Finalize

After finalizing

The disc becomes play-only and you can

no longer record or edit.

You can record and edit the disc after formatting

(Ô page 36) although it becomes play-only after finalizing.

• Titles are divided into about 5-minute (

8-minute)

chapters after finalizing. This time varies greatly depending on
the condition and mode of recording.

• There is a pause of several seconds between titles and chapters

during play.

-R

-R DL -RW(V) +R +R DL +RW

-R

-R DL -RW(V) +R +R DL

-R DL +R DL

Note

-R

-R DL +R +R DL

-RW(V)

+R +R DL

Creating Top Menu

–Create Top Menu

Enabling the second layer on DL

(dual- or double- layer on single side)

discs to be recordable

–Close First Layer

+RW

-R DL +R DL

Note

Disc Name

Auto-Play Select

Finalize

Top Menu

DVD

Management

DVD-R DL

Titles

Used

1

0:00

Remain

of the first layer

3:54(LP)

DVD Management

Advertising